AN8018SA |
RFQ for AN8018SA Required Field |
 |
| Technical/Catalog Information | AN8018SA-E1 |
| Vendor | Panasonic - SSG (VA) |
| Category | Integrated Circuits (ICs) |
| Type | Step-Down (Buck), Step-Up (Boost), Inverting |
| Number of Outputs | 2 |
| Voltage - Input | 1.8 ~ 14 V |
| Voltage - Output | Up to 15V |
| Current - Output | 50mA |
| Power - Output | 135mW |
| Package / Case | 16-SSOP |
| Packaging | Cut Tape (CT) |
| Internal Switch(s) | Yes |
| Synchronous | No |
| Rds (On) | - |
| Operating Temperature | -30°C ~ 85°C |
| Frequency - Switching | 20kHz ~ 1MHz |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AN8018SA E1 AN8018SAE1 AN8018SAE1CT ND AN8018SAE1CTND AN8018SAE1CT |
| Product | Manufacturers | Pack | D/C |
| AN8018SA | - | TSSOP-3.9-16P | 6+ |
Typical Application |
Features |
| · LCD displays, digital still cameras, and PDAs | ` Wide operating supply voltage range: 1.8 V to 14 V` High-precision reference voltage circuit -VREF pin voltage: ±1% -Error amplifier: ±1.5%` Surface mounting package for miniaturized and thinner power suppliesPackage: SSOP-24D 0.5-mm lead pitch 7.8 mm ´ 6.8 mm ´ t 1.9 mm` Supports control over a wide output frequency range: 20 kHz to 1 MHz` On/off (sequence control) pins provided for each channel for easy sequence control setup` The negative supply error amplifier supports 0-volt input. Common-mode input voltage range: - 0.1 V to VCC -1.4 V This allows thenumber of external components to be reduced by two resistors.` Fixed duty factor: 86% However, the duty can be adjusted to anywhere from 0% to 100% with an external resistor.` Timer latch short-circuit protection circuit (charge current: 1.1 mA typical)` Low input voltage malfunction prevention circuit (U.V.L.O.) (operation start voltage: 1.67 V typical)` Standby function (active-high control input, standby mode current: 1 mA maximum)` Alternate package versions also available. Part No.: AN8049FHN Package: QFN-24 0.5-mm lead pitch5.4 mm ´ 4. |
| Parameter | Symbol | Rating | Unit |
| Supply voltage | VCC | 15 | V |
| Off terminal allowable application voltage | VOFF | 15 | V |
| IN+1 terminal allowable application voltage *2 | VIN-1 | 6 | V |
| IN-1 terminal allowable application voltage *2 | VIN-1 | 6 | V |
| IN+2 terminal allowable application voltage *2 | VIN+2 | 6 | V |
| Out1 terminal allowable application voltage | VOUT | 15 | V |
| Supply current | ICC | - | mA |
| Out1 terminal output current | IO | +50 | mA |
| Out2 terminal source current | ISO(OUT) | -50 | mA |
| Out2 terminal sink current | ISI(OUT) | +80 | mA |
| Power dissipation *1 | PD | 135 | mW |
| Operating ambient temperature | Topr | -30 to +85 | °C |
| Storage temperature | Tstg | -55 to +150 | °C |
